What are the requirements for the water supply of the drip irrigation pipe production line?
release time:
2022-03-15 16:35
What are the requirements for the water supply of the drip irrigation pipe production line?
After many consumers buy a drip irrigation pipe production line in our home, we will always tell customers the water source requirements for water supply in advance, because the use will cause equipment failure. The following editor will introduce the requirements of the drip irrigation pipe production line for water supply:
1. The micro water pump directly supplies water;
2. Utilize the existing water tower. It is necessary to calculate the relative height difference between the water tower and the irrigation pipe. Generally, the pressure of water delivery is required to reach 0.1-0.2 MPa, which is equivalent to the requirement that the relative height difference between the water tower and the irrigation area of the inlaid drip irrigation pipe reach more than 10 meters;
3. Set up a pressure tank beside the well. The capacity of the pressure tank is 2-8 cubic meters. After the well water is pumped in, it is pressurized to 0.2-0.5 MPa. The pressure tank should be equipped with an automatic water replenishing device to ensure that the inlaid drip irrigation pipe can provide uninterrupted and even water supply;
4. Simple water storage tank. Set up simple water storage tanks next to the greenhouse, such as iron buckets, water tanks, plastic tanks, cement pools, etc., with a general capacity of 0.5 cubic meters. The height of the water storage tank should be about 1.5 meters from the ground. When using, the water is continuously injected into the water storage tank with a micro water pump.
At present, the sprinkler irrigation technology has achieved many results. The first is to save water. The drip irrigation system uses pipes to deliver water to reduce leakage. Therefore, during the growing period of grapes, it can save 40% to 50% of water compared with ground irrigation. The second is to save fertilizer and medicine. The fertilizer is directly delivered to the root system of the crop along with the drip irrigation water, which is easily absorbed by the root system of the crop and improves the utilization rate; it can also be properly seasoned, which is extremely beneficial to the growth of the crop, and the average fertilizer can be saved by about 20%. The pesticide water is saved in the pipeline and closed for transportation, which avoids the transmission of water to insect disasters. In addition, the dosage of herbicides and pesticides is significantly reduced, and the pesticides can be saved by more than 10% to 20%, and the insecticidal effect is good. At the same time, it also saves land. Replacing the agricultural canals and field irrigation methods that occupied the land during above-ground irrigation can save about 5% of the land by the buried and ground-moving water pipelines.
Well, after reading the above article, do you feel that your knowledge has improved a lot? Pay more attention to the website of Shandong Zhongda Plastic Machinery Co., Ltd., you will benefit more.
More News
Service Hotline:
E-mail:
Address:
No.6, the original road(north), high tech Zone, Laiwu, Shandong
